Before you order ipe hardwood decking, settle
four things: the quality of the boards, how dry they are, which fasteners you
will use, and where the material comes from. Get those right and the deck is
far more likely to lay flat, stay stable and last for decades. |
|
KEY FACTS · Ipe is also sold as Brazilian Walnut and has a Janka hardness rating of
3,680 lbf. · With proper installation and minimal maintenance, ipe decking can last
25 to 75 years or more. · ABS Wood sells mill-direct and quotes from your takeoff or cut list. · FSC-certified material is available from ABS Wood on request. · ABS Wood decking is inspected on arrival and checked again when your
order is filled. |
What
should you check about grade and quality?
Look for tight specifications, consistent colour and minimal bowing
or imperfection. Boards that arrive straight are far easier to space evenly, and
the finished surface shows it.
Ask how the supplier inspects stock. At ABS Wood, decking is
inspected by experienced Brazilian wood specialists on receipt, then reviewed
again by our local team when an order is filled.
Order a few free samples first if you can, so you can judge colour
and milling before committing to the full run.
How
dry should the boards be?
Moisture content matters because boards that dry out after
installation move, and movement shows up as gaps, cupping and loosened
fasteners. Ask the supplier how moisture is controlled before shipping.
Once the boards arrive, let them sit on site, off the ground and out
of direct rain, before you start fixing them down.
Which
fasteners suit ipe?
Ipe is dense enough that you should plan on pre-drilling for face
screws, and use stainless steel so nothing stains or corrodes. Hidden fastener
systems give a clean, screw-free surface, and we cover the options in our hidden
fasteners guide.
Check the fastener manufacturer's instructions for board thickness
and spacing before you buy, since requirements vary by product and system.
What
sourcing questions are worth asking?
Ask whether the supplier sells direct from the mill, how the order
is priced, and how it ships. For ipe
hardwood decking, we price from your takeoff or cut list, so send
the full quantity with any waste allowance included.
If your project needs documented sourcing, ask for it up front.
FSC-certified material is available from us on request, and you can read more
on our responsible forestry page.
Check transit times for your region on our shipping page
before you set a start date.
Frequently
asked questions
|
Q How much ipe decking should I
order? Work from an accurate takeoff and add an allowance for cuts
and waste. Our team can review your cut list and advise. |
|
Q Is ipe more expensive than
pressure-treated lumber? Yes, the upfront cost is higher than pressure-treated
lumber or many composite products. Its long lifespan and low maintenance are
why many builders still choose it. |
|
Q Can I buy ipe decking direct
as a contractor? Yes. We sell to contractors, builders, architects and bulk
buyers at wholesale pricing based on project details. |
|
Q Where can I see finished ipe
decks? Browse our ipe
decking projects for examples, many of them from
customers. |
|
Send us your takeoff or
cut list through our quote page
and we will reply with pricing and availability. |

No comments:
Post a Comment