Thursday, 19 November 2026

How to Install Ipe Decking: A Step-by-Step Guide

Installing ipe decking is straightforward once you accept that the wood is extremely dense: every screw needs a pilot hole and every board needs a sound, level frame. Check the framing, pre-drill, leave your gaps, then seal the cut ends.



 

KEY FACTS

·       Ipe has a Janka hardness rating of 3,680 lbs, roughly three times harder than oak.

·       Ipe is naturally resistant to rot, decay and termites.

·       Ipe carries a Class A fire rating.

·       Properly maintained ipe decks routinely last 50+ years.

·       Untreated ipe weathers to a silver-gray patina.

 

What should you check before laying the first board?

Check that the framing is solid, level and dry. Ipe will not hide a wavy joist, so fix high and low spots before decking goes down.

Joist spacing depends on board thickness and local building code, so confirm it with your building department.

Sort the boards by length and colour before you start. Ipe varies from board to board, and mixing the bundle gives a more even finish.

How do you fasten ipe deck boards?

Pre-drill and countersink every fastener. Ipe is dense enough to snap ordinary screws, so use stainless steel screws sized for hardwood.

Hidden fasteners give a clean surface with no visible screw heads. Our guide to hidden fasteners explains how they work.

Near board ends, drill a slightly larger pilot hole to reduce the risk of splitting.

What gap should you leave between boards?

Leave a small, consistent gap so water can drain and the boards can move with humidity. Ipe is stable, but it still swells and shrinks a little with the seasons.

Use a spacer between every board rather than judging by eye. Install in dry weather where you can, since boards laid wet shrink and open their gaps.

Stagger end joints, then trim the ends in one clean line.

How do you finish and seal ipe decking?

Seal every cut end as you go. End grain trades moisture fastest, so end sealer helps prevent checking.

Left untreated, ipe weathers to a silver-gray patina. To keep the rich brown, apply a penetrating oil finish made for hardwood decks and plan to reapply it.

Our guide to maintaining ipe, cumaru and tigerwood decking explains the upkeep that follows.

Frequently asked questions

Q  Do I need to pre-drill ipe decking?

Yes. Without a pilot hole, screws can snap or the board can split.

Q  Does ipe need to be sealed?

Seal the cut ends. The faces are optional: let them turn silver-gray or apply an oil finish.

Q  Can I use ordinary screws on ipe?

Use stainless steel screws suited to hardwood and follow the fastener maker's instructions.

Q  Where can I get help with my installation?

Call our team. We answer questions during installation and after the sale.

 

 

Ready to build? See our ipe decking range and pricing or send us your cut list for a quote.

 

No comments:

Post a Comment